|
Product Details:
Payment & Shipping Terms:
|
Output Capacity: | 40/44kVA | Output Power: | 32/35kW |
---|---|---|---|
Type: | Generator Set | Engine: | Perkins |
Frequency: | 50Hz / 60Hz | Cooling Type: | Water Cooled |
High Light: | Perkins Diesel Generator Set,Perkins Diesel Genset |
Silent / Open Type Perkins Diesel Generators 3 Phase With Water Cooling System
HDP Series HDP35 / HDP35S |
Model |
Standby Power |
Prime Power |
Engine |
Alternator |
Control Panel |
|||
KVA |
KW |
KVA |
KW |
Stamford |
Hidier(Optional) |
Model |
||
HDP35/S |
44 |
35 |
40 |
32 |
1103A-33TG1 |
PI144J |
HD32 |
MRS10 |
Spec #1 Features |
|
1 |
Excitation system: self-excited (AREP and PMG are optional) |
2 |
ATS (automatic transfer switch) receptacle |
3 |
Lockable battery isolator switch |
4 |
Stainless galvanized zinc plates with strong corrosion resistance |
5 |
Vibration isolators between the engine/alternator and base frame |
6 |
Integrated wiring design |
7 |
Base fuel tank for at least 8 hours running |
8 |
Equipped with an industrial muffler |
9 |
50℃ radiator |
10 |
Top lifting and steel base frame with forklift holes |
11 |
Drainage for fuel tank |
12 |
Complete protection functions and safety labels |
13 |
IP54 (soundproof sets), IP56 (control system) |
14 |
Water jacket preheater, oil heater are available. |
15 |
Double air cleaner, spare parts, special tools are available. |
16 |
Custom-made is acceptable |
Generator Set Model |
Length (L) mm |
Width (W) mm |
Height (H) mm |
Net Weight kg |
HDP35 |
1900 |
800 |
1400 |
800 |
HDP35S |
2300 |
1100 |
1700 |
1400 |
Spec#2 Engine Perkins 1103A-33TG1 |
Engine speed |
Type of |
Typical generator |
Engine power |
||||
(rev/min) |
Operation |
output (net) |
Gross |
Net |
|||
|
|
kVA |
kWe |
kWm |
bhp |
kWm |
bhp |
1500 |
Prime power |
45 |
36 |
42.2 |
56.6 |
41.3 |
55.4 |
Standby power |
49.6 |
39.7 |
46.5 |
62.4 |
45.6 |
61.2 |
|
1800 |
Prime power |
53.1 |
42.5 |
50.5 |
67.7 |
48.9 |
65.6 |
Standby power |
58.7 |
46.9 |
55.6 |
74.6 |
53.9 |
72.3 |
Air inlet
Mounted air filter
Fuel system
Rotary type pump
Ecoplus fuel filter
Lubrication system
Wet sump with filler and dipstick
Spin-on oil filter
Cooling system
Thermostatically controlled system with gear-driven circulation pump and belt-driven pusher fan
Mounted radiator and piping
Electrical equipment
12 volt starter motor and 12 volt 65 amp alternator with DC output
12 volt shut-off solenoid energised to run
Flywheel and housing
High inertia flywheel to SAE J620 Size 10/111/2
SAE 3 flywheel housing
Mountings
Front engine mounting brackets
Fuel Consumption |
||||
Engine Speed |
1500 rev/min |
1800 rev/min |
||
UK g/hr |
l/hr |
UK g/hr |
l/hr |
|
At standby power |
2.6 |
12 |
3.1 |
14.3 |
At prime power |
2.3 |
10.7 |
2.8 |
12.9 |
At 75% of prime power |
1.8 |
8.2 |
2.1 |
9.9 |
At 50% of prime power |
1.2 |
5.7 |
1.5 |
7.1 |
General Data
Number of cylinders ..................................................................3
Cylinder arrangement ...........................................Vertical in-line
Cycle ..............................................................................4 stroke
Aspiration ............................................................ Turbocharged
Combustion system.......................................... ....direct injection
Compression ratio ...........................................................17.25:1
Bore and Stroke ................................................. 105 x 127 mm
Displacement ............................................................... 3.3 litres
Direction of rotation ................Anti-clockwise viewed on flywheel
Cooling system..................................................... Water cooled
Total coolant capacity................................................. 10.2 litres
Total lubrication system capacity ................................. 7.9 litres
Dimensions
Length .........................................................................1049mm
Width ............................................................................634 mm
Height ............................................................................951mm
Total weight (dry)........................................................... 420 kg
Final weight and dimensions will depend on completed specification.
Spec#3 Alternator StamfordPI144J |
Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards such as BS5000, VDE 0530, NEMA MG1-32, IEC34, CSA C22.2-100, AS1359. Other standards and certifications can be considered on request. |
CONTROL SYSTEM |
STANDARD AS480 AVR (SELF EXCITED) |
|||||||
VOLTAGE REGULATION |
± 1.0 % |
|||||||
SUSTAINED SHORT CIRCUIT |
SELF EXCITED MACHINES DO NOT SUSTAIN A SHORT CIRCUIT CURRENT |
|||||||
CONTROL SYSTEM |
AS480 AVR WITH OPTIONAL EXCITATION BOOST SYSTEM (EBS) |
|||||||
SUSTAINED SHORT CIRCUIT |
REFER TO SHORT CIRCUIT DECREMENT CURVE (page 8) |
|||||||
STATOR WINDING |
DOUBLE LAYER CONCENTRIC |
|||||||
WINDING PITCH |
TWO THIRDS |
|||||||
WINDING LEADS |
12 |
|||||||
STATOR WDG. RESISTANCE |
0.154 Ohms PER PHASE AT 22°C SERIES STAR CONNECTED |
|||||||
ROTOR WDG. RESISTANCE |
0.99 Ohms at 22°C |
|||||||
EXCITER STATOR RESISTANCE |
22.9 Ohms at 22°C |
|||||||
EXCITER ROTOR RESISTANCE |
0.21 Ohms PER PHASE AT 22°C |
|||||||
EBS STATOR RESISTANCE |
12.9 Ohms at 22°C |
|||||||
R.F.I. SUPPRESSION |
BS EN 61000-6-2 & BS EN 61000-6-4,VDE 0875G, VDE 0875N. refer to factory for others |
|||||||
WAVEFORM DISTORTION |
NO LOAD < 1.5% NON-DISTORTING BALANCED LINEAR LOAD < 5.0% |
|||||||
MAXIMUM OVERSPEED |
2250 Rev/Min |
|||||||
BEARING DRIVE END |
BALL. 6310 - 2RS. (ISO) |
|||||||
BEARING NON-DRIVE END |
BALL. 6306 - 2RS. (ISO) |
|||||||
|
1 BEARING |
2 BEARING |
||||||
|
WITH EBS |
WITHOUT EBS |
WITH EBS |
WITHOUT EBS |
||||
WEIGHT COMP. GENERATOR |
184 kg |
182.3 kg |
187 kg |
185.3 kg |
||||
WEIGHT WOUND STATOR |
84 kg |
84 kg |
84 kg |
84 kg |
||||
WEIGHT WOUND ROTOR |
70.97 kg |
69.27 kg |
72.68 kg |
70.98 kg |
||||
WR² INERTIA |
0.2758 kgm2 |
0.2741 kgm2 |
0.2763 kgm2 |
0.2746 kgm2 |
||||
SHIPPING WEIGHTS in a crate |
202 kg |
200.3 kg |
211 kg |
209.3 kg |
||||
PACKING CRATE SIZE |
85 x 51 x 67 (cm) |
85 x 51 x 67 (cm) |
Spec#4 Control System ComAp InteliLite®MRS10 |
InteliLite® MRS 10 and InteliLite®MRS 15 are new integrated controllers for engine control in manual and remote start applications, featuring full gen-set monitoring and protection. InteliLite® controllers are equipped with a powerful graphic display. Icons, symbols and bar graphs for intuitive operation together with high functionality set new standards in gen-set control. Special low temperature (IL-MRS 10 -LT
Features
Spec #5 Options |
Items |
Options |
Select |
Engine |
Water Jacket Preheater |
|
Oil Preheater |
|
|
Alternator |
Winding Temperature Measuring Instrument |
|
Alternator Preheater |
|
|
PMG |
|
|
Anti-damp and anti-corrosion treatment |
|
|
Anti-condensation heater |
|
|
Generator Set |
Tools with the machine |
|
Fuel System |
Low fuel level alarm |
|
Automatic fuel feeding system |
|
|
Fuel T-valves |
|
|
Canopy |
Trailer |
|
Lubricating sys |
Oil with the machine |
|
Exhaust Sys. |
Protection board from hotness |
|
Cooling Sys. |
Front heat protection |
|
Coolant (-30°C) |
|
|
Control Panel |
Remote control panel |
|
ATS |
|
|
DSE |
|
|
Voltages |
415/240V |
|
400/230V |
|
|
380/220V |
|
|
220/127V |
|
|
200-115V |
|
Contact Person: Mr. Yang Congli(Colin)
Tel: +86 13370160269
Fax: 86-10-59602578